I picked this unusual device up from an antique store in rural Pennsylvania, near where the groundhog works one day a year. It’s a fairly large place and prices vary, but it’s worth a couple hours of your time if you’re into that sort of thing, see the link below.
(The place seems to only have a facebook presence, and I’m not going to post one of those dirty links here - but here is the local chamber’s page for Yoder’s Antique Mall in Punxsutawney: https://punxsutawney … 73c05f142052452104c6.)
It’s a toolbox! Yeah, right on! Well…no, unless you’re interested in old toolboxes. It’s a fairly nice example of something from when Sears used to make things worth more than the metal it was stamped from. It’s what’s inside that I was interested in.
It’s a demand meter! Yeah, right on! Well…yes, but there’s something unusual about this one. It’s a 2-wire, 115VAC unit. While this is similar to what you would have on your house (or would have had before the electronic switchover,) those are usually wired for 230VAC instead.
This one appears to have been meant for sub-branch metering at some point, as evidenced by the easy-to-remove wiring compartment at the bottom of the meter’s housing. Whomever had this before me took advantage of that in that they wired a plug and outlet in line with the device - perhaps as a jobsite meter to pay the site owner for power consumed? Not really sure here save that all of the cable is pretty stiff and in need of replacement if it was going to be used.
Overall age of the device is in question as well - it looks to be 1930s, but Westinghouse probably made these things for decades. I suppose I could try and track it down by serial number, but who knows if those records still exist?
I tried it out by hooking it to a kitchen appliance with a heating element. It works as expected.
I’d like to get it out of it’s silicone covered metal box for a good cleaning, but that’s a project for another day.
I recently wrote about my experience with a large enterprise that still had an email system that didn’t meet changes made in 2014. I wrote an email to their DMARC reporting addresses explaining the situation - those bounced with full mailboxes. I wrote an email to Contact Us and got boilerplate back. I didn’t expect anything else.
I poked at their system one last time with mxtoolbox, and it looks like they actually did fix it. I’m not sure when they did so, as of Friday they were still being sent to quarantine by my provider, so it must have been after hours or something - perhaps my email system was still prejudiced because records hadn’t propagated yet.
Who knows. But I guess that goes to show, sometimes making a complaint does work. It just amazes me it took 10 years and someone not getting a single email to fix it.
I picked up a couple of small kits from everyone’s favorite Chinese junk store, Aliexpress:
They appear to be the same base kit, except that one has an EM80 cat’s eye style tube, and one has an EM84 style side-looking tube. There was also a 200V power supply included with one of them, but I’m not sure which one it was at this point.
There are absolutely no instructions to speak of, but the boards seem to be well labeled. It shouldn’t be too much trouble to get these together, assuming all the parts are correct.
I’m planning on assembling these in a few months (as time allows,) so check back to see if they’re done and my thoughts on assembly and operation.
I’ve written about email security and having the proper records set in the past, but last week I ran across probably one of the most interesting (and really bad) ones to date.
I use an email service that I pay for, simply because I like having my own domain name - as you can probably tell by the links that pepper my posts, and the fact that you’re reading this on Wereboar.
Sunday, I (was supposed to have!) received an email from a large corporation that contained information that I paid for. Didn’t get it, so I logged in to my email maintenance console - and there they were.
They were quarantined in a way I’d never seen before. All text and links were struck out. Nothing could be clicked. You could move them around, but they would never pass into visibility in any IMAP folder. The only thing I could do is delete them in the maintenance console. The system would not release them - they were so suspicious that they just wouldn’t. Period.
The first thing I do is check the company in question’s email records using mxtoolbox - and there it is. Two SPF records. While this was acceptable at one point, a change to the way email worked - IN 2014! - made having multiple records of this type a red flag, and any email system worth it’s salt will, at minimum, dump these into spam.
SPF is a text record set in an email service that tells the email server who is allowed to send mail. You’re allowed one. Having more than one means that someone else could have set one without your knowledge - and that leads to all kind of interesting scenarios, the least of which is lots of spam being relayed through your email server.
The change that allowed only one SPF record was made in 2014. That means this large multi-national corporation has had 10 years to make this simple fix to their email system.
My email service didn’t put these in spam, it simply said “Nope, not going to let you have these, they’re suspicious beyond compare.” The fact that it’s a world-wide operating company that many use on a daily basis is even worse. They have the time and resources to take 10 minutes and set their email server up properly. I made a complaint. Will they change it?
No. They literally don’t care. Send an email to the ones set in their other security record (DMARC) and it comes back “mailbox full.” No one is even looking at issues.
So, did I get my information? Yes. I keep a couple of old Gmail addresses for whatever reason - nostalgia I guess. Gmail used to be the gold standard for consumer email service, but now it’s the library book of email services. It accepted the malformed records without complaint, which it absolutely should not have done.
What do you need to take away from this? As email becomes more and more weaponized, you’re going to have more systems rejecting your email. Fix your $&#&$! crap. If you don’t know how, hire someone to do it for you.
If you don’t, there’s going to be a time when you can’t get your email through. And that’s going to be purely your fault.
I’ve posted a number of manuals and things over the past few years, and they’re scattered around the site. Here’s all of them to date, this list will be updated as new ones are added.
Since this was originally posted, I’ve added a document share to this site that contains everything that I post about (and have a document for.) Find it here: https://wereboar.com … r=wereboar-documents
For the most part, the OX Drive documents have been removed.
Please share, but let them know where you found it. Come visit this little pig!
SO…here’s another one of these piece of crap meters. Why? This one was cheap, and was purchased non-working - primarily for parts, as in the NIXIE tubes. ZM1000 tubes aren’t exactly common these days, so having a few spares laying around seems to be a good idea.
I decided to at least take a look inside to see what’s broken. It doesn’t power up because the fuse is blown. That never bodes well, so I jumpered the fuse temporarily and turned it on quickly.
Yep, it’s got some problems. All segments of the tubes are lit, and the tab on the +5 regulator transistor got pretty warm being on for 5 seconds. Turned it on again to get some quick voltage measurements:
+5V Output (Emitter) = +0.8V
+6V (Base) = +2.6V
Measuring the resistance to ground:
E = 2.8 Ohms.
That’s not good.
A good unit measures (to ground):
E = 1.4MOhms.
+5 primarily powers chips, so I pulled all the ICs to start. Things changed, but not necessarily completely back to normal.
Good unit:
E = 1.4M
B = > 8.5k (charging)
C = Open
Bad unit:
E = 2.5k
B = 1.9k
C = Open
I started putting chips back in, the very first one I replaced (IC5) took the Emitter of the regulator transistor down to 3 Ohms. So that chip is bad.
However, there’s something else wrong. With all the chips gone, the +5 load should be negligible. I did a quick scrape on the transistors to see if one was shorted but didn’t find anything obvious. That leaves old capacitors that could be leaky. This thing is full of Tantalum drops and cheap-ass film caps, any one of those could be partially shorted and there’s no real way to know except to start lifting parts.
Since this is just a parts unit, and the tubes and driver ICs appear good, I think it’s just going in the parts bin as intended. Maybe if I have some snowy Saturday, I’ll pull it out and start lifting parts to see what’s going on. But for now - parts is parts, and parts is what it is.
One of the most interesting and accessible pieces of tech that came out of the tube era is the Magic Eye. A phosphor cup (or target) is illuminated with an electron beam, and a grid allows or blocks that electron beam to “open” the eye. It’s a device that can indicate changes at the speed of the phosphors used, and it found it’s way into all kinds of devices - radios as tuning meters, signal tracers as signal indicators, capacitance checkers as a quality meter - anywhere a fast visual change needed to be shown to the user.
These two signal tracers, one branded Knight, the other Eico, have eye tubes as their wattmeter and signal indicators. The Eico’s eye is so bright it overloads the camera, while the Knight’s eye shows much more use in it’s dimness.
While eyes fell out of favor as meters, VFDs, and other electronic indicators came into their own, they still remain one of the most striking devices in mid-century electronics.
It’s a Switchcraft 2501f Microphone Connector. It found it’s way into low-frequency RF devices after WWII, where it remained until displaced by the superior BNC connector.
They’re still available, but they are not cheap - expect to pay $14-15 for a new one! If you’re not worried about looks, just replace it with a BNC and be done with it, you get access to a wider range of connections.
I’d never attended this show, but was pleasantly pleased with the turnout. There were perhaps a few dozen vendors and a packed house of visitors in the old gymnasium of the converted school. Quite a bit to look at, and prices were really good. I managed to bring home some good things for a total of $10, almost spending more on drinks and snacks on the way home! I didn’t think the weather was going to cooperate, but it turned out to be just a bit slushy, cold, and windy.
We wandered the aisles for about an hour, taking some time to stop and look at the old photos on the walls from the building’s time as a school, talking to some of the vendors, and digging through boxes of stuff. Since this is so close and easy to get to, I’ll probably attend next year as well - weather permitting of course!
A bunch of books. The ECG manual went home with a friend.
Some rat shack remainders. I picked up the cable.
Lots of AM CB showing up right now, including these old phone-style units.
Parts, and some rat shack 300 ohm clip on connectors. Got these for the nostolgia factor.
A friend pulls a microcassette unit from a dollar bin.
Some test equipment. The (working) signal tracer went home for $2.
More random equipment.
Even more equipment. The power supply was unique enough to go home with me for $2.
And I have to say it was a pretty good little show. The weather wasn’t planning on agreeing on the ride down, but it turned out to be just a skiff of snow and cold, windy weather. There were maybe a couple dozen vendors, and a packed house full of guests to the point where cars had to shuffle so others could leave.
While I only spent an hour there, I walked out with some good stuff as did my fellow show-goer. I’m working on processing pictures, and will post those soon.
