- 2024
- Aug
- 12
The PACO B-10 Battery Eliminator and Charger
I picked this guy up at the Columbus Hamfest for $5. It claims to be a power supply of sorts, and a battery charger. It is lopsidedly heavy. So at minimum, there’s a nice big transformer in the thing, if all else fails.
It’s fairly unassuming from the outside. The front has the business end of the device - two meters, output terminals, output adjust, and a couple of switches.
As a note, this thing is only 6 and 12 volt, with a little wiggle room.
The back and sides are just as unassuming, nothing except some vents, the cord, and a serial number.
You’d think there’s some sort of regulation in this device, right? Wrong.
There’s pretty much nothing inside of this guy. Apparently, the only regulation is YOU, and that’s by turning the dial on the front of the device!
Inside, it’s a history lesson in electronics.
Lots of cloth-coated solid wire and big wads of copper and metal make up this device.
Here’s the power transformer, two giant sized but comparatively small value capacitors, and a giant choke in the middle that hides the voltage adjust tap.
Here’s some boom cans, aka old capacitors. These claim to have been made by Pyramid in 1958. 6000uF at 20V - these can be replaced by 6800@25 for about $4 each, and two of them would fit handily in the space taken by one, with room to spare!
No, I’m not going to try and charge them!
Last, we have the business end of the device. The rectifiers - in this case, giant selenium plates. I wonder what kind of condition these things are in. Are rotten eggs in my future?
This is certainly a product of it’s time - it’s interesting in that it’s a battery charger not made by one of the companies that did such things at the time, but also tries to be a primitive DC supply for device bench testing. Now, of course, we’d just grab a 20A switcher, but this thing was what you had in the 50s.
Is it going to go back in service? Not until I can at least get some new capacitors, but even then - it may just end up as nice power supply transformer in a box. Who knows where this is going…
These pictures were accepted by Radiomuseum for one of their exhibits. Check them out! https://www.radiomus … minator_kit_b.html#a