- 2024
- Sep
- 20
An Eico 145 Signal Tracer - Component Notes
It doesn’t really mean anything, but I wanted to check all of the components I took out of the Eico 145 Signal Tracer that’s currently on my bench. There was nothing unexpected here, most of the parts had drifted out of tolerance - or in one case, broke upon removal.
I didn’t test anything for leakage, and that’s probably where the majority of the issues would be.
The resistors were all carbon comp 20%, and most of the capacitors paper wax - assumed 20%. One ceramic tube capacitor was present - supposed to be a mica - as were the electrolytic filters. The electrolytics are assumed to be -20% / +100%. ESR on these wasn’t bad, but they’re due for replacement regardless.
Some capacitors weren’t present in the device, I’m not sure if they were never there or if they were removed for some reason.
Here’s the parts and their values, no particular order.
Next step is to start rebuilding. I’m going to deviate from the assembly diagram somewhat and build the power supply fully before moving on to the next part.
Next part of this series: https://wereboar.com … tarting-the-rebuild/
Previous part of this series: https://wereboar.com … ignal-tracer-part-5/