Fixing the Heathkit IG-72 Signal Generator
Tuesday, October 15, 2024 at 12:49:55
Since there doesn’t seem to be a lot wrong with it, I’ve decided to go all in on fixing the IG-72 I picked up at the Scioto Valley hamfest. As you can see, it’s kind of out of balance with the bottom half of the signal being a bit flat.
This starts with new tubes and a re-balance, which seems bring these guys into line. The meter will also need recalibrated - much easier these days with the ultra-high impedance voltmeters allowing for direct calibration of the device.
I picked up some new tubes from Antique Electronic Supply.
I don’t really care what the brand is.
As a side note, you can purchase old-school wire sleeve (spaghetti) from Antique Electronic Supply as well. It’s sold by the foot, with the black being more expensive - I assume due to it’s authentic look for older devices. I chose to get some white because I’m restoring for use, not because it’s pretty.
You can get some of that for yourself: https://www.tubesand … tti-old-style-20-awg
This probably won’t end up on the bench for a while, but I’ll post my findings when it does.
Starting the series: https://wereboar.com … part-1-observations/
Wrapup and link to all posts: https://wereboar.com … -and-final-thoughts/