- 2024
- Oct
- 8
An Eico 145 Signal Tracer - Part 6c - I was only going to run a few wires.
I sat down tonight with the intention of tacking in the B+ lines for the transformer and running the filaments. I ended up building half the unit.
I probably didn’t need to use a big terminal strip on the left, but that’s what I had so that’s what I used. I kind of wish I’d picked up more of these years ago from Mendelson’s…
Most of the audio amp is built, I have about 6 parts left to place, the filaments (!), one AC line, and then plumb the audio through the output switch. There’s a couple of layouts that I’m not happy with, but they’re all snug and not going anywhere.
Depending on time, I’ll probably finish this in the next two parts. Stay tuned!
Next part of this series: https://wereboar.com … art-6d-almost-there/
Previous part of this series: https://wereboar.com … ng-the-power-supply/